TABLE OF CONTENTS
WARNINGS
WARNING/LIABILITY STATEMENT
Important Safety Guidelines
Quick Start Guide
Scout Rifle Overview
Magazine Overview
All information contained in this manual is subject to change without notice. UTS, reserves the right to make changes and improvements to products without incurring any obligation to incorporate such improvements in products previously sold.
Operational Instructions
If you, as a user, do not accept liability, UTS, requests that you do not use a UTS marker. By using this UTS marker you release UTS, of any and all liability associated with its use.
Velocity Adjustment
Barrel Removal
Air Source Warnings
This marker is not a toy and is surrendered by UTS, with the understanding that the purchaser assumes all liability from unsafe handling or any action that constitutes a violation of any applicable laws or regulations. UTS, shall not be liable for personal injury, loss of property or life resulting from the use of this product under any circumstances, including any intentional, reckless, negligent or accidental discharges.
AND PAINTBALL GUN GUNS PAINTBALL IA/ADMIMPVV An IV IIV u accessories are not toysi
- Careless use or misuse may result in serious bodily injury or death!
Barrel Sock
- Eye protection designed for paintball must be worn by the user and all persons within range. - Must be 18 years of age or older to operate or handle any paintball gun and paintball gun accessories without adult or
Magazine Loading
Barrel Cleaning
Oiling Scout Rifle
Disassembly
Assembly Diagram
Warranty & Repairs
parental supervision. - Read and understand all cautions, warnings, and operating manuals before using any paintball gun or paintball gun accessory. - Do not aim paintball gun at eyes or head of people or at animals. - Paintball guns are to be used with paintballs only. - To prevent fire or shock hazard, do not expose unit to rain or moisture. - To prevent fire or shock hazard, do not immerse unit in liquids. - To prevent fire or shock hazard, do not disassemble any electronic paintball device. - The disposal of the battery used to power this product may be regulated in your area. - Please conform to all local or state regulations with regard to battery disposal. - Use common sense and have fun.
Any tampering with the unit voids your warranty. Please consult with a First Strike" service center before performing any maintenance. The use of non factory authorized components within this product may cause a fire or shock hazard.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. WARNING: This product may contain chemicals known to the state of California to cause cancer and/or birth defects of other reproductive harm. Wash hands after handling.
You must be at least 18 years of age to purchase this product. This product may be mistaken for a firearm by law enforcement officers or others. Altering the color of the product or brandishing the product in public may be dangerous and may be considered a crime.
SCOUT RIFLE DIAGRAM
Thank you for purchasing the First Strike Scout Bolt Action Launcher. Like any air rifle, it is important that safety is on the forefront of your mind at all times when using this product. Never operate the Scout without ASTM compliant goggles or aim at anyone that is not wearing proper goggles intended for the game of Paintball. The First Strike Scout is an advanced system that is suitable for all levels of play and will provide years of service if the following steps are meticulously followed.
BOLT handle
1. Before airing up, place 3 drops of First Strike approved oil into the ASA. 2. Insert the barrel into the front of the Bolt Action, and twist until locked into position.
3. Screw in your air source into the rear ASA (Air System will need to be filled with air) 4. Grab the bolt action handle on the side of the Scout and pull back until the bolt catches.
5. "Dry" Cycle the Scout without paint to evenly distribute oil into unit. 6. When storing your Scout, always remove your barrel - this ensures that the ball detents will retain their form and prevent wear.
CATCH TECH TIPS AND INFO ON:
El DON'T FORGET TO REGISTER! Register your Scout at www.first-strike.com
MODEL SPECIFICATIONS
CALIBER
HEIGHT
ACTION
SINGLE SHOT
BARREL LENGTH
HPA OR C02
WEIGHT
LENGTH
MAGAZINE
10/11 ROUNDS
Extracted from the PDF. Read the full manual above, or download it.